MS-6150 SERIES

Applications

SUBMERSIBLE SEWAGE PUMPS FOR STATIONARY WET PIT INSTALLATION (P TYPE) AND MOBILE WET PIT INSTALLATION (S TYPE)

 
Model KW HP Discharge CURVE US/Metric Freq (HZ) Phase Manual
MS6150 (50Hz) 10.5 14 10" 50 Three
MS6150 (60Hz) 9 12 10" 60 Three

SPECIFICATIONS

MOTOR
6-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic
switches (thermals) embedded in stator winding to protect against overheating.
Stator insulation class 'H' (180ºC)

POWER SUPPLY
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency
combination.(208/220/230/380/415/460/575/1000V)

BALL BEARINGS
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is
capable of carrying high thrust and radial loads. Upper bearing is a deep groove
single row oversized bearing. The bearings are enclosed with high temperature
grease-containing special Anti-corrosion additive.

POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU. (4 core std., 7 core optional)

SHAFT SEALS
Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical
seals minimize shaft overhang and deflection maximizing mean time between
service intervals. Moisture sensor available to detect progressive seal wear.

HYDRAULICS
Single Channel Impellers, Hydrodynamically balanced with improved flow pattern
contribute to a virtually clog-free pump.

COOLING
Integral cast cooling fins on motor casing with large surface area ensure efficient
heat dissipation and low temperature

performancecurve