6-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic
switches (thermals) embedded in stator winding to protect against overheating.
Stator insulation class 'H' (180ºC)
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is
capable of carrying high thrust and radial loads. Upper bearing is a deep groove
single row oversized bearing. The bearings are enclosed with high temperature
grease-containing special Anti-corrosion additive.
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU. (4 core std., 7 core optional)
Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical
seals minimize shaft overhang and deflection maximizing mean time between
service intervals. Moisture sensor available to detect progressive seal wear.
Single Channel Impellers, Hydrodynamically balanced with improved flow pattern
contribute to a virtually clog-free pump.
Integral cast cooling fins on motor casing with large surface area ensure efficient
heat dissipation and low temperature