G-900 SERIES

Applications

PORTABLE ELECTRIC SUBMERSIBLE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS

 
Model Brochure KW HP Discharge CURVE US/Metric Freq (HZ) Phase Manual
G902T 26 35 8" 50/60 Three
G906T 26 35 6" 50/60 Three
 

SPECIFICATIONS

MOTOR
2-pole induction continuous rated motor with squirrel cage rotor.
Stator insulation class 'H' (180ºC)
Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz
Power Rating : 35HP @ 60 Hz, 26kW @ 50Hz Full Load
Current FLA: 44 Amps @ 460v. 51 Amps @ 400v.
Max. temperature of the pump liquid : 104°F/40°C
Max. start/stop per hour : 15
Star - Delta Starting Optional

POWER SUPPLY
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency
combination. (380/415/460/575/1000V)

BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings.
The bearings are enclosed with high temperature grease-containing special
Anti-corrosion additive.

POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU. 6 Core or Control cable with
thermal overloads optional.

SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten
Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT
Epoxy coated Steel Outer Casing
Cast Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 56HRC is Standard.
pH Range 5 - 8

STRAINER
304 Stainless Steel with 1-9/16” (25.5mm) X 3/8” (10mm) {G 902},
3/8” (10mm) Round Holes {G 906}

SUBMERGENCE
Submergence below liquid surface min 5” (127mm) max. 50’ (15m).

WEIGHTS (Approx. without cable)
G 902: 510lbs. (232Kg)
G 906: 525lbs. (239Kg)

performancecurve